Copper Certification

View:

DSX2-8000 CAT8 Cable Analyzer

►業界唯一CAT8 攜帶型網路纜線分析儀

►支援40G及High-Power PoE測試

FlukeNetworks Versiv™ 的模組化設計支援銅纜認證測試、光纖長度與損耗測試、OTDR 測試與 光纖端面檢查。
Cat 6A、8、FA I/II級測試速度無可比擬,且符合所有現行測試標準規範
以圖形方式顯示故障位置,包括串音、回波損耗和屏蔽的故障等,以便更快進行故障排除。
Intertek認證符合TIA Level 2G ─ 最嚴苛的精密度要求。

DSX2-5000 Cable Analyzer

Fluke Networks DSX2-5000 CableAnalyzer™ 銅纜佈線認證分析儀 (內建國家通訊傳播委員會 (NCC)於105.8修正公布CLE-EL 3600-9 佈線測試標準)

DSX2-600 Cable Analyzer

內建國家通訊傳播委員會 (NCC)於105.8修正公布CLE-EL 3600-9 佈線測試標準

DTX-1500 Cable Analyzer

已於2017年6月30日停產

DTX-1800 Cable Analyzer

Calibration & Service Ends on June 30, 2018

CableIQ™ Qualification Tester

Copper qualification tester troubleshoots and qualifies Ethernet network cabling speed (10/100/1000/VoIP).

Works on live networks to provide Ethernet switch detection and device configuration
Measure network capacity (10 Meg, 100 Meg, 1 Gig) to determine support for VoIP, data and video
Advanced troubleshooting diagnostics; insertion loss, cross talk, noise issues
Core troubleshooting features; length, distance to fault, graphical wire mapping, opens, shorts, power over Ethernet (POE) detection
Tests all copper cabling media: twisted-pair, coax, and audio
Locate and trace cables with digital toning technology. Requires IntelliTone 200 Digital Probe (included with CIQ-KIT)
Qualifies and troubleshoots Industrial Ethernet cabling

MicroScanner™ Cable Verifier Series

MicroScanner PoE Capabilities:

Quickly determine if a problem is caused by a bad or unconnected cable, insufficient power, or a Powered Device (PD).
Information for the Network Engineer to investigate potential switch configuration or malfunctions.
PoE Switch Verification – Determine if a switch port can provide enough power by reporting PoE class (0-8).
Powered Pairs – Graphically identifies powered pairs. Including Dual Signature where the switch port delivers power on 2 or 4 pairs (802.3bt or PoE ++)
Active Switch Detection - Determine if a cable is connected to a switch port and port speed up to 10G
Cable Testing – Identify any shorted, open or crossed wires at both ends, length of each pair, and send tones to find cables.
Validate and troubleshoot your Industrial Ethernet copper cabling
PoE Injector verification - Display injector voltage level

MicroScanner Series Features:

Straightforward Interface – Graphical wiremap, length, cable ID, and distance to fault displayed on one screen
Multimedia Support – Tests all common media types including RJ11, RJ45, Coax(MS2 only), with no need for adapters
IntelliTone Toning – Trace virtually any cable or wire pair with IntelliTone digital and analog toning
VDV Service Detection – Verifies today’s media services, including 10/100/1000 Ethernet, POTS, and PoE
Oversized Display – Large, backlit LCD makes results crystal clear whether in bright sunshine or a dark closet
Magnetic Strap (included in MicroScanner kits) - All...

IntelliTone™ Pro 200 LAN Toner, Tracer and Probe

Digital network cable toner and probe traces and locates cables on active network.

IntelliTone digital toning technology:

Ends network cable location confusion, decisively rejects noise and false signals
Network cable tracer locates cables on active networks, even when terminated at a switch
Isolates cable and wiring within a bundle, despite cable bleed
Confirms cable location, verifies cable continuity, and detects cable faults (opens, shorts, and reversed pairs) in one step
Signal strength indicator LEDs so you can help identify one cable that is bundled with other cables
Probe has built-in pair tester to identify open, shorted and crossed pairs
SmartTone® analog toning technology:

Isolates individual wire pairs precisely by changing tone when shorted
Effectively traces and locates voice, audio, and video cabling

Tooltest 壓接測線工具組

Tooltest是一款具有網路線測試儀與網路接頭壓接工具二合一的可分離式網路線測試夾鉗工具。Tooltest可讓網路專業安裝或維護人員能方便快捷地測試乙太網雙絞線的連續性、短路、斷路、錯絞等接線狀況。只需按壓測試儀上方按鈕,便能自動測試線纜並顯示線纜引腳對引腳的接線狀況。
版權所有 抄襲必究 copyright © 2020 Hantac Technology Co., Ltd. All rights reserved.