View:

FI-7000高解析度光纖端面檢視器

• 自動驗證光纖端面清潔是否符合標準,並以通過/失敗顯示
• 圖形化指示問題區域為髒汙、細紋、刮痕或破損
• 符合工業標準IEC-61300-3-35
• 免去人為主觀判斷錯誤
• 可將認證端面圖形儲存

FI-3000 FiberInspector™ Ultra Camera

Get a Grip on the Most Efficient, Most Complete Inspection Solution

Total endface visibility with Live View from full trunk to individual endface
Integrates with Versiv™ Cabling Certification System and LinkWare™ Reporting Software for simple operation and documentation or with mobile phones for testing and sharing
Optional automated pass/fail results in seconds
Multiple Autofocus/Autocentering Camera design for real time imaging
Rugged, ergonomic design with convenient holster
Supports one or two rows of 8,12,16 or single UPC or APC connectors.

VisiFault™ Visual Fault Locator - Cable Continuity Tester

Visual fault locator cable continuity tester locates fibers, finds faults, verifies continuity and polarity.

Locates visual faults including tight bends, breaks and bad connectors
Accelerates end-to-end fiber checks
Easily verifies polarity and identifies fibers
Features continuous and flashing modes
Ergonomic case survives drops, impacts and vibrations
Supports 2.5 mm and 1.25 mm SFF connectors
Over 80 hours of battery life with two AA batteries

FI-500 FiberInspector™ Micro

Fiber Inspection Scope Camera to verify that Fiber End Faces are not contaminated or damaged

PortBright™, a built-in flashlight illuminates dark areas and dense panels
Fiber inspection scope camera with autofocus for stable images in few seconds
Large display to view singlemode and multimode fiber endfaces
Includes 4 UPC tips (LC, SC, 1.25 mm and 2.50 mm). APC, Bulkhead tips available.
Autocenter for precise fiber ferule inspection

多模光纖距離與斷點測試儀

•多模光纖一鍵測試 - 無需用戶設置即可使用
•六秒測試時間,避免長達數小時的盲目故障診斷
•定位通道中的多個事件,全面掌握可能有問題的鏈路和連接
•定位高損失事件或斷路,這些是多模光纖故障的最常見原因
•定位和測量高反射事件,這是導致網絡性能降低和高誤碼率的原因
•各種工具包配置,包括其他診斷工具,如功率表、光源和光纖檢測顯微鏡,
方便實現“光纖最佳實踐”,提高技術人員的故障診斷能力
•完善的數據中心布線網絡測試儀

FiberInspector Mini 光纖端面檢視器

• 200x 放大倍數探頭使其可用於檢查端口內的和跳線上的多模和單模端面
• 1.8” Mini 顯示屏具有超高清晰度
• 採用緊握啓動模式,可延長電池使用壽命
• 附帶各種探頭適配器尖端,可通過各種不同型號的連接器端口進行檢查

單模光纖距離與斷點測試儀

•幾秒時間內檢測長達 23,000 米的光纖
•定位單模光纖中的嚴重彎曲、高損失接合處、斷路和臟連接器
•保存高達 99 份測試結果,方便日後查看
•分析光纖鏈路,確定通道連接性
•定位由端面污染或接觸不良導致的誤碼率來源
•每條光纖鏈路最多可報告 9 個事件
版權所有 抄襲必究 copyright © 2021 Hantac Technology Co., Ltd. All rights reserved.